Wednesday, 16 September 2015

Important address

How to name organic compounds using the IUPAC rules
In order to name organic compounds you must first memorize a few basic names. These names are listed within the discussion of naming alkanes. In general, the base part of the name reflects the number of carbons in what you have assigned to be the parent chain. The suffix of the name reflects the type(s) of functional group(s) present on (or within) the parent chain. Other groups which are attached to the parent chain are called substituents.

·         Alkanes - saturated hydrocarbons
The names of the straight chain saturated hydrocarbons for up to a 12 carbon chain are shown below. The names of the substituents formed by the removal of one hydrogen from the end of the chain is obtained by changing the suffix -ane to -yl.
Number of Carbons
Name
1
methane
2
ethane
3
propane
4
butane
5
pentane
6
hexane
7
heptane
8
octane
9
nonane
10
decane
11
undecane
12
dodecane
·         There are a few common branched substituents which you should memorize. These are shown below.
·         http://www.chem.uiuc.edu/GenChemReferences/nomen.GIF
·         Here is a simple list of rules to follow. Some examples are given at the end of the list. 
1.    Identify the longest carbon chain. This chain is called the parent chain.
2.    Identify all of the substituents (groups appending from the parent chain).
3.    Number the carbons of the parent chain from the end that gives the substituents the lowest numbers. When compairing a series of numbers, the series that is the "lowest" is the one which contains the lowest number at the occasion of the first difference. If two or more side chains are in equivalent positions, assign the lowest number to the one which will come first in the name.
4.    If the same substituent occurs more than once, the location of each point on which the substituent occurs is given. In addition, the number of times the substituent group occurs is indicated by a prefix (di, tri, tetra, etc.).
5.    If there are two or more different substituents they are listed in alphabetical order using the base name (ignore the prefixes). The only prefix which is used when putting the substituents in alphabetical order is iso as in isopropyl or isobutyl. The prefixes sec- and tert- are not used in determining alphabetical order except when compared with each other.
6.    If chains of equal length are competing for selection as the parent chain, then the choice goes in series to:
a) the chain which has the greatest number of side chains.
b) the chain whose substituents have the lowest- numbers.
c) the chain having the greatest number of carbon atoms in the smaller side chain.
d)the chain having the least branched side chains.
7.    A cyclic (ring) hydrocarbon is designated by the prefix cyclo-which appears directly in front of the base name.
In summary, the name of the compound is written out with the substituents in alphabetical order followed by the base name (derived from the number of carbons in the parent chain). Commas are used between numbers and dashes are used between letters and numbers. There are no spaces in the name.
Here are some examples: 
Here are some examples: http://www.chem.uiuc.edu/GenChemReferences/ex_alkanes.GIF

Here are some examples: http://www.chem.uiuc.edu/GenChemReferences/ex_alkanes.GIF
·         Alkyl halides
The halogen is treated as a substituent on an alkane chain. The halo- substituent is considered of equal rank with an alkyl substituent in the numbering of the parent chain. The halogens are represented as follows:
F
fluoro-
Cl
chloro-
Br
bromo-
I
iodo-
·         Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_alkyl_halides.GIF
·          
·         Alkenes and Alkynes - unsaturated hydrocarbons 
Double bonds in hydrocarbons are indicated by replacing the suffix -anewith -ene. If there is more than one double bond, the suffix is expanded to include a prefix that indicates the number of double bonds present (-adiene, -atriene, etc.). Triple bonds are named in a similar way using the suffix -yne. The position of the multiple bond(s) within the parent chain is(are) indicated by placing the number(s) of the first carbon of the multiple bond(s) directly in front of the base name.
Here is an important list of rules to follow:
1.    The parent chain is numbered so that the multiple bonds have the lowest numbers (double and triple bonds have priority over alkyl and halo substituents).
2.    When both double and triple bonds are present, numbers as low as possible are given to double and triple bonds even though this may at times give "-yne" a lower number than "-ene". When there is a choice in numbering, the double bonds are given the lowest numbers.
3.    When both double and triple bonds are present, the -en suffix follows the parent chain directly and the -yne suffix follows the -en suffix (notice that the e is left off, -en instead of -ene). The location of the double bond(s) is(are) indicated before the parent name as before, and the location of the triple bond(s) is(are) indicated between the -en and -yne suffixes. See below for examples.
4.    For a branched unsaturated acyclic hydrocarbon, the parent chain is the longest carbon chain that contains the maximum number of double and triple bonds. If there are two or more chains competing for selection as the parent chain (chain with the most multiple bonds), the choice goes to (1) the chain with the greatest number of carbon atoms, (2) the # of carbon atoms being equal, the chain containing the maximum number of double bonds.
5.    If there is a choice in numbering not previously covered, the parent chain is numbered to give the substituents the lowest number at the first point of difference.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_alkenes.GIF

·         Alcohols 
Alcohols are named by replacing the suffix -ane with -anol. If there is more than one hydroxyl group (-OH), the suffix is expanded to include a prefix that indicates the number of hydroxyl groups present (-anediol, -anetriol, etc.). The position of the hydroxyl group(s) on the parent chain is(are) indicated by placing the number(s) corresponding to the location(s) on the parent chain directly in front of the base name (same as alkenes).
Here is an important list of rules to follow:
1.    The hydroxyl group takes precedence over alkyl groups and halogen substituents, as well as double bonds, in the numbering of the parent chain.
2.    When both double bonds and hydroxyl groups are present, the -en suffix follows the parent chain directly and the -ol suffix follows the -en suffix (notice that the e is left off, -en instead of -ene). The location of the double bond(s) is(are) indicated before the parent name as before, and the location of the hydroxyl group(s) is(are) indicated between the -en and -ol suffixes. See below for examples. Again, the hydroxyl gets priority in the numbering of the parent chain.
3.    If there is a choice in numbering not previously covered, the parent chain is numbered to give the substituents the lowest number at the first point of difference.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_alcohols.GIF

·         Ethers 
You are only expected to know how to name ethers by their commmon names. The two alkyl groups attached to the oxygen are put in alphabetical order with spaces between the names and they are followed by the word ether. The prefix di- is used if both alkyl groups are the same.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_ethers.GIF

·         Aldehydes 
Aldehydes are named by replacing the suffix -ane with -anal. If there is more than one -CHO group, the suffix is expanded to include a prefix that indicates the number of -CHO groups present (-anedial - there should not be more than 2 of these groups on the parent chain as they must occur at the ends). It is not necessary to indicate the position of the -CHO group because this group will be at the end of the parent chain and its carbon is automatically assigned as C-1.
Here is an important list of rules to follow:
1.    The carbonyl group takes precedence over alkyl groups and halogen substituents, as well as double bonds, in the numbering of the parent chain.
2.    When both double bonds and carbonyl groups are present, the -en suffix follows the parent chain directly and the -al suffix follows the -en suffix (notice that the e is left off, -en instead of -ene). The location of the double bond(s) is(are) indicated before the parent name as before, and the -al suffix follows the -en suffix directly. Remember it is not necessary to specify the location of the carbonyl group because it will automatically be carbon #1. See below for examples. Again, the carbonyl gets priority in the numbering of the parent chain.
3.    There are a couple of common names which are acceptable as IUPAC names. They are shown in the examples at the end of this list but at this point these names will not be accepted by the computer. Eventually they will be accepted.
4.    If there is a choice in numbering not previously covered, the parent chain is numbered to give the substituents the lowest number at the first point of difference.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_aldehydes.GIF

·         Ketones 
Ketones are named by replacing the suffix -ane with -anone. If there is more than one carbonyl group (C=O), the suffix is expanded to include a prefix that indicates the number of carbonyl groups present (-anedione,-anetrione, etc.). The position of the carbonyl group(s) on the parent chain is(are) indicated by placing the number(s) corresponding to the location(s) on the parent chain directly in front of the base name (same as alkenes).
Here is an important list of rules to follow:
1.    The carbonyl group takes precedence over alkyl groups and halogen substituents, as well as double bonds, in the numbering of the parent chain.
2.    When both double bonds and carbonyl groups are present, the -en suffix follows the parent chain directly and the -one suffix follows the -en suffix (notice that the e is left off, -en instead of -ene). The location of the double bond(s) is(are) indicated before the parent name as before, and the location of the carbonyl group(s) is(are) indicated between the -en and -one suffixes. See below for examples. Again, the carbonyl gets priority in the numbering of the parent chain.
3.    If there is a choice in numbering not previously covered, the parent chain is numbered to give the substituents the lowest number at the first point of difference.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_ketones.GIF

·         Carboxylic Acids 
Carboxylic acids are named by counting the number of carbons in the longest continuous chain including the carboxyl group and by replacing the suffix -ane of the corresponding alkane with -anoic acid. If there are two -COOH groups, the suffix is expanded to include a prefix that indicates the number of -COOH groups present (-anedioic acid - there should not be more than 2 of these groups on the parent chain as they must occur at the ends). It is not necessary to indicate the position of the -COOH group because this group will be at the end of the parent chain and its carbon is automatically assigned as C-1.
Here is an important list of rules to follow:
1.    The carboxyl group takes precedence over alkyl groups and halogen substituents, as well as double bonds, in the numbering of the parent chain.
2.    If the carboxyl group is attached to a ring the parent ring is named and the suffix -carboxylic acid is added.
3.    When both double bonds and carboxyl groups are present, the -en suffix follows the parent chain directly and the -oic acid suffix follows the -en suffix (notice that the e is left off, -en instead of -ene). The location of the double bond(s) is(are) indicated before the parent name as before, and the -oic acid suffix follows the -en suffix directly. Remember it is not necessary to specify the location of the carboxyl group because it will automatically be carbon #1. See below for examples. Again, the carboxyl gets priority in the numbering of the parent chain.
4.    There are several common names which are acceptable as IUPAC names. They are shown in the examples at the end of this list butat this point these names will not be accepted by the computer. Eventually they will be accepted.
5.    If there is a choice in numbering not previously covered, the parent chain is numbered to give the substituents the lowest number at the first point of difference.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_carboxylic_acids.GIF

·         Esters 
Systematic names of esters are based on the name of the corresponding carboxylic acid. Remember esters look like this:
http://www.chem.uiuc.edu/GenChemReferences/esters.GIF

The alkyl group is named like a substituent using the -yl ending. This is followed by a space. The acyl portion of the name (what is left over) is named by replacing the -ic acid suffix of the corresponding carboxylic acid with -ate.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_esters.GIF
·         Amines 
You are only expected to know how to name amines by their common names . They are named like ethers, the alkyl (R) groups attached to the nitrogen are put in alphabetical order with no spaces between the names and these are followed by the word amine. The prefixes di- and tri- are used if two or three of the alkyl groups are the same.
NOTE: Some books put spaces between the parts of the name, but we will not. Follow the examples.
Here are some examples:
http://www.chem.uiuc.edu/GenChemReferences/ex_amines.GIF




·          
·         Summary of functional groups 
Functional group
Prefix
Suffix
carboxylic acids
none
-oic acid
aldehydes
none
-al
ketones
none
-one
alchols
hydroxy-
-ol
amines
amino-
-amine
ethers
alkoxy-
-ether
fluorine
fluoro-
none
chlorine
chloro-
none
bromine
bromo-
none
iodine
iodo-
none


Friday, 28 March 2014

Solution of AKUEB XI year Paper II(CRQs And ERQs)



CLASS XI FINAL TERM EXAMINATION 2014
1st  SHIFT
Chemistry Paper II
                 
Time allowed: 2 hrs 20 minutes                                                                     Max. Marks 55
Solution

                                                                                                                              (Total 9 marks)
Q.1(a)  You are provided with 6.0 gm of C and excess amount  of O2
Calculate the amount of CO2 prepared by reacting them. ?                                                                          (2 mark)   

Step I
Mole of carbon =0.5 mol
Step II
Mole of CO2 =0.5 mol
Step III
Amount of C O2= mol x molar mass of CO2=22 g



(b)        Diethyl zinc is a chemical used in the library to protect   the books from the worms. Its composition is 53% zinc, 38.9% carbon and 8.1% hydrogen; find the empirical formula of the compound.            (   Atomic mass Zn= 65.5 amu     )                       (2 mark)                                                                     


Element
Zn
C
H
%
53
38.9
8.1
Mole ratio
0.809
3.24
8.1
Simple mole ratio
1
4
10


(c) Write down  two differences  between  the following  spectrums.         (2 mark)

Line (or ) Discontinuous
Continuous  
“In the line spectrum, the bands of colours are separated by dark spaces”.
This type of spectrum may be obtained when light emitted from a gas source pass through a prism.

It is spectrum in which different colours are different into each other. There are no dark spaces separating these colours”.

If the light from the discharge tube is allowed to pass through the prism, some discrete sharp lines on an otherwise complete dark background are obtained such spectrum is called “LINE SPECTRUM”.
.

The visible portion of spectrum obtained from ordinary sunlight and lights from incandescent sources are the examples of continuous spectrum.

         
                                                                                  
   (d)    Differentiate between Atomic orbital and Molecular orbital.(Only one )                  (1 mark)

Atomic Orbital
“Orbitals  are  the  regions  around  the nucleus in which the probability of finding the electron is maximum.”
            Molecular Orbital
The linear combination of atomic orbital gives two type of molecular orbital called as bonding and anti bonding molecular orbital.

   

e)      Define the following terms:                                                                                  (2 mark)

         i) Hydrolysis                                      
The reaction of cation and anion in which water is dissociates & combined with the ions so as to change its pH is known as hydrolysis".
            Hydrolysis is a chemical reaction between the ions of electrolyte and water molecules during which the pH of solution becomes change. This reaction is associated with weak electrolyte i.e. salts of weak acids and base.



            ii)Hydration
The process in which water molecules surround and interact with the ions of an electrolyte is called “Hydration” and the ions is called hydrated ions.
When an aqueous solution of a salt is evaporated the salt is crystallized with a definite no. of molecules
Is due to the attraction of positive ions for the –ve terminal of water molecules and negative ion for the +ve terminal of water molecules

                                               

Q.2                                                                                                                                          (Total  6 marks)
  a) Define Hybridization. How it explain the Shape of SiH4                                                 (2 mark)
    
Definition:      
The hypothetical process of mixing of different atomic orbital to produce the same number of equivalent orbitals having same shape  and same energy is known as hybridization, the orbital so formed are called hybrid orbital” 
                        The concept of hybridization was introduced by pauling. The type of hybridization depends upon the number of mixing orbital i.e.SP3,SP2,SP,dSP2,d2SP3 etc                                                                                    

Explanation:   
The electronic configuration of carbon is given below.
   Si(z=14)=1s2,2s2,2px2,2py 2Pz2, 3s1,3px1,3py1 ,3Pz1
                        The 3s and three 3p orbital of carbon mixed together to get a set of four equivalent sp3 hybrid orbital which are located at the corner of regular tetrahedron and each sp3 orbital of carbon over laps with s orbital of hydrogen from four sigma bonds.




Other molecules which show sp3 hybridization are CCl4, SiCl4,SnCl4 etc.                                                                                                     
_______________________________________________________________________________


(b) Define the Bond order . Determine the bond order of the He.                                     (2 mark)

Bond order  is represent the  no of  number covalent bond

           Energy Diagram:


                                                                                                           
                                                                                                            Bond order = 2-0 /2

                                                                                                                               = 1







(c)    In Ammonia, water and methane the central atom has same sp3 hybridization but they form different geometrical shape. Explain your answer in detail .                                                               (2 Marks)             
                                              
·         Methane is a tetravalent molecule. In order to create four separate but equivalent orbitals, a single 2s and three 2p orbitals of the carbon hybridize into four sp3 orbitals. These four hybrid orbitals extend toward the corners of a tetrahedron centered on the carbon atom.
·         In the ammonia molecule, 2s and 2p orbital’s create four sp3 hybrid orbital’s. Three form covalent bond with hydrogen. The fourth sp3 orbital has a non-bonding lone pair of  electron, which can create ammonium ion  when they coordinate with hydrogen ion in acidic solution.
·         In a water molecule, two sp3 hybrid orbital’s  are occupied by the two lone pairs on the oxygen atom, while the other two are used for bonding with hydrogen. The H-O-H bond angle is less than the tetrahedral angle because of the repulsion  of non-bonding electrons on the other orbital’s.
Q.3                                                                                                               (Total 7 marks)   
      a) Define the following  terms
                                                                                                                                (2 Marks) Surface Tension:
            “The inter-molecular force that drawn the molecules on the surface of a liquid together causing the surface to act like a thin elastic skin, this phenomenon is called SURFACE TENSION”.                   
OR
“The force per unit length or energy per unit area of the surface of a liquid is called SURFACE TENSION”.
Surface tension of the liquid is represented by  g    OR   s, and its units are dynes / cm   OR      erg / cm2.
          Viscosity:

                        It is common observation that some liquids flow more readily than the other. For example water moves over a glass plate more quickly than glycerine. Similarly, honey and mobil oil flow more slowly than water. Hence, liquids which flow easily are called “MOBILE” & such liquids which do not flow easily are known as “Viscous”. The resistance of a liquid to flow is expressed in terms of viscosity, which may be defined as,
“The internal resistance to the flow of a liquid is called its viscosity”
Viscosity is represented by ‘h’ and its unit is “POLSE”. Normally smaller units “CENTIPOISE” or “MILLIPOISE” are used.
1 POISE          =          1 gm/cm
& 1 POISE      =          100 CENTIPOISE
                        =          1000 MILLIPOISE

b)      Differentiate between the following (3 Marks)

Crystalline Solid
Amorphous Solid
Geometry
Particles of crystalline solids are arranged in an orderly three dimensional network called crystal, hence they have definite shape.
Particles of amorphous solids are not arranged in a definite pattern, hence they do not have a definite shape.
Melting Point
Crystalline solids have sharp melting point, this is because attractive forces between particles long range and uniform.
Amorphous solids melt over a wide range of temperature i.e. they do not have sharp melting point, because the inter-molecular forces vary from place  to place
Cleavage
The breakage of a big crystal into smaller crystals of identical shape is called cleavage. Crystals cleavage along particular direction.

Amorphous solids do not break down at fixed cleavage planes.


                                                                                                  
  










Q.3 c)
Draw a graph between volume and temperature on the basis of Charles’ Law        
           and explain  absolute zero                                                                                             (2 Marks)

 
        The absolute zero and Charles  refer to an experiment that gas tend to expand when heated. Charles law can be used to determined with volume and temperature readings when plotted T on the horizontal axis. You have to make sure you have the volume at zero and then extrapolate the data until it goes through the zero volume point.

Absolute Zero:                                                                                                                                                                                                                                                                                                              
The lowest temperature that is theoretically possible, at which the motion of particles which constitutes heat would be minimal. It is zero on the Kelvin scale, equivalent to −273.15°C  
It is Zero Kelvin temperature at which the volume , pressure and temperatures is  zero  .   According Charles’s “volume is directly proportional to temperature   at constant pressure” this statement only applicable to absolute temperature Or temperature in Kelvin scale which  start from Absolute Zero because at 0oC temperature of gas the volume of is greater than zero.
                                                                                                                                                                                                                                       
Q.4                                                                                                                             (Total 8 marks)
a)   In industry Sulphuric is manufacture by contact process. The production of Sulphric acid  depend the amount of SO3.   Apply the Le-Chateleir  principle to increase the production of Sulphur trioxide in contact process .       
                              2SO2 + O2       ↔ 2SO3                          ∆H= Negative               (4 mark)          
            i) Effect of Temperature :

If we increase the temperature of above reaction at equilibrium state the equilibrium state will shift backward direction.  
If we decrease the temperature of above reaction at equilibrium state the equilibrium state will shift forward  direction.  

            ii ) Effect of Pressure:
If we increase the pressure of above reaction at equilibrium state the equilibrium
state will shift forward direction.  
If we decrease the pressure of above reaction at equilibrium state the equilibrium state will shift backward direction.
            iii) Effect of concentration:
If concentration of reactant or concentrations of or reactants are increase at equilibrium state then equilibrium will shift to words forward direction.
If concentration of product or concentrations of products are increase at equilibrium state then equilibrium will shift to words Backward direction   .
If concentration of product or concentrations of  products are removed at equilibrium state then equilibrium will shift to words Backward direction   .

            iv) Effect of Catalyst:
The catalyst does not effect on equilibrium state 

b) Calculate the pH of 0.25 M NH4Cl                                                                        (4 Marks)
                        NH4+ + H2O ↔ NH3 + H3O+
The Dissociation constant kb is 1.76 x10-5 and kw is 1x10-14
Method I
We Know that
Kw =Ka x Kb

Ka = Kw÷ Kb

Ka  =1x10-14 ÷1.76 x10-5

Ka  = 5.68 x10-10
   
According the equation

            NH4+ +  H2O ↔ NH3 + H3O+
t=0        0.25M                 Nil     Nil
t=eq.     0.25M-x              x           x     

x is very small value  therefore  negligible  in 0.25 -x
         
Ka              =   [ NH3][ H3O+] / [ NH4+]
      5.68 x10-10= X.X /0.25
      5.68 x10-10= X2 /0.25
                   X2 = 5.68 x10-10(0.25)
                  

X=1.191 x10-5

The concentration of H3O+ is 1.19x10-5

pH=-log [ H3O+]

pH= -log [1.191x10-5]

pH= 4.92





















Method  II
We Know that
Kw =Ka x Kb

Ka = Kw÷ Kb

Ka  =1x10-14 ÷1.76 x10-5

Ka  = 5.68 x10-10
   
According the equation

            NH4+ +  H2O ↔ NH3 + H3O+
t=0        0.25M                 Nil     Nil
t=eq.     0.25M-x              x           x     


          Ka              =   [ NH3][ H3O+] / [ NH4+]
      5.68 x10-10= X.X /0.25-X
      5.68 x10-10= X2 /0.25-x
                   X2 = 5.68 x10-10(0.25-X)
                  
X2 =1.4x x10-10-5.68 x10-10X

 0   = X2 +5.68 x10-10X - 1.4x x10-10

Find the vlaue of X  by  solution set  

X=1.2x10-5

The concentration of H3O+ is 1.2x10-5

pH=-log [ H3O+]

pH= -log [1.2x10-5]

pH= 4.9

                                                                                     
Q.5                                                                                                                              (Total 4 marks)
   a) Discuss the relation of activation energy and rate of chemical reaction.                         (2Marks)

Energy Of Activation:

            “The excess energy which is required for the reaction in addition to the average energy of the molecules is called Energy of Activation”. It is denoted by Ea and is measured in K.J/mole.

            According to the “collision theory” chemical reaction can only be possible when the effective collision among the molecules takes place and it happens only when the molecules of reactants it happens only when the molecules of reactants acquire threshold energy.
            “The minimum energy which required for the reaction is called Threshold Energy”. It is denoted by El.

b)Define the following terms                                                                                (2 Marks)
i)                    Order of Reaction


The sum of order of reactants in a chemical reaction which effect the rate of reaction
___________________________________________________________________________



ii)                  Rate determining Step in reaction
The slowest step of multiple step reaction is known as rate deterring step
_______________________________________________________________________________

Q.6                                                                                                                           (Total 6 marks)
a) Find the boiling point  of a solution  of 92.1 g of iodine , in 800g of Chloroform, assuming that the iodine nonvolatile at that the solution is an ideal. Kb  of chloroform is 3.63 oC/mol/kg an freezing point is  61.26 oC                                                                                                                                            (2 mark)
Data:
Mass of iodine =92.1g
Mass of chloroform=800g
                            Kf =4.68
Freezing point =  - 63.5 0C
The atomic mass is 127 amu

∆Tf    =Kf x molality
∆Tf   =4.68  x 92.1g÷254g/mol ÷0.8 Kg
∆Tf     =2.1 0C
Tf(sol) = -63.50C  - (2.10C)



b) Identify the set up in the above diagram.
Write down its application as well.       (2 mark)                                                               

The apparatus is know is standard hydrogen electrode it is reference electrode which is used to determine the electrode potential of every element 
________________________________________________



(c)  Calculate the heat of formation of N2O4 from the following data:       (2 mark)          
               i)     2NO 2           →      N2O4   ∆H=?
              ii) ½  N2 + O2        →      NO2    ∆H= +333.95 KJ /mol
              iii)  N2  +2 O2        →      N2O4  ∆H= +9.3 KJ/mol                            

Solution :

Equation (ii) Multiple by  2
2x {½  N2 + O2        →      NO2  }         ∆H=  2x {+333.95 KJ /mol}

  iv)   N2 + 2O2        →      2NO2            ∆H=  667 KJ /mol
Equation  (iv)   Subtract form Equation  (iii)
 
         N2  +2 O2        →      N2O4                      ∆H= +9.3 KJ/mol     
         N2 + 2O2        →      2NO2                       ∆H=  667 KJ /mol 
-             -                         -                                      -
   2NO 2             →      N2O4                        ∆H=  - 658  KJ/mol                                        
                                                                             
 Q.7                                EITHER                                                     (Total 7 marks )
a)   i)Discuss different spectrum Series   observed in spectrum study of hydrogen atom.                                                     
      Explain the different energies of these series on the basis of Bohr’s theory 
 ii) Discuss two defects of Bohr’s atomic theory      
                                                            OR
b)  i) Al2S3  can be prepared by the reaction        2Al    +    3S                                 Al2S3

When 20.0 g of  Aluminum (Al)  and 30.0 g of Sulphur(S) react in the reaction . Determine the limiting reactant and amount of Al2S3 produce in the reaction. How much non limiting reactant was present unused or in excess.  
     ii)  Differentiate between theoretical and actual yield      ( Two Difference )                 
(a)
 SPECTRUM OF HYDROGEN ATOM:

Although Hydrogen atoms contains only one electron, its spectrum gives a large number of series. Balmer in 1885, studied the spectrum of Hydrogen . he found that , when energy is supplied to the sample of hydrogen gas, individual atoms absorb different amount of energy. The electrons in higher energy levels are unstable & drop back to the lower energy levels &during this process energy is emitted in the from of line spectrum containing various lines of particular frequency & wave length.
                 Balmer observed that a series of lines appeared in  the visible region when the electrons drop from 3rd , 4th ,----nth energy levels to the second orbit . These spectral line are known as “BALMER SERIES”. He proposed an empirical formula to find wave no.(u) of each line.
where n2 = 3,4,5,…………
Lyman later on discovered another series in uv-region . wave no. of each line was sound by similar formula.
where n2 = 2,3,4,…………
Paschen discovered another such series in infrared region. Wave no. of each line was given by:-
Þ             
where n2 = 4,5,6,……………
Bracket found another series infar-infrared region. Wave no. of such lines was given by.    
Þ             
where n2 = 5,6,7,……………
Pfund also found another series far-infrared region. Wave no. of each line was given by:-
Þ             
where n2 = 6,7,8,……………



iii)                Spectral line , which correspond to the transition of an element other than Hydrogen  from one energy level to another , have from one  energy level to another have for the most part , a fine structure , each line actually  consist of several separate close lying lines as doublet , triplet and so indicating that some of the electron of the given energy level have different energies .That is to say , that the electrons belonging to same energy level may differ in their energy 
iv)                Does not explain  sub-shell and sub energy level of electron in an atom  




Q.8                                                                                                                    (Total 8 marks)

                                                                
 b)  i) Define  of Raoult’s  Law (All three definition )and derive an expression between lowering of vapour pressure with molality of solution
       ii) Write  down the two  differences  between  colloids and suspension of solution.                                           

Solution

b) According to Raoult’s law
                            
1st definition
“Vapour pressure solvent in solution is directly proportional to mole fraction of solvent”

Po    α   mole fraction of solvent

2nd definition
“Lowering vapour pressure of solvent in solution is directly proportional to mole fraction of solute”


ΔP α   mole fraction of solute
3rd definition
Relative change in vapour pressure of solution is equal the mole fraction of solute

Where
            P is vapour pressure of pure solvent
             
          ΔP is  change of vapour pressure of solution

Derivation

Where   mole of solute = 

              Total mole of solution  = no. of mole of solute + no. of mole  solvent
     

             mole of solvent  =

                             

Where
mass of solute = w
mass of solvent = W
Molar mass of solute =m
Molar mass of solvent =M
Fro very dilute solution w/m is very small value therefore it is neglected


ii)
Properties
Colloidal Solutions
Suspension
Size
1– 1000nm
>1000nm
Nature
Heterogeneous
Heterogeneous
Filterability(Diffusion
through parchment paper)
Colloidal particles pass through filter paper but not through parchment paper.
Suspension particles do not pass through filter paper and parchment paper.