Friday, 28 March 2014

Solution of AKUEB XI year Paper I(MCQS)


CLASS XI FINAL TERM EXAMINATION 2014
Chemistry Paper I
1ST SHIFT
Max. Marks: 30                                                                                       Time: 40 minutes
 




Solution




1. The largest number of molecules is present in
            A. 3.6g of H2O
            B.  4.8 g of C2H5OH
            C. 2.8 g of CO           
            D.  5.4 g of N2O5
2. A limiting reactant is the one which
            A .  is take is lesser quantity in gram as compared to other reactants
            B .  is take lesser quantity in volume
            C . give maximum amount of product
            D . give the minimum amount of the product   

3.One mole of (NH4)3PO4 contains _?_ moles of hydrogen atoms.
A.    3
B.     6
C.     9
D.           12

4. The conclusion drawn from Rutherford’s a particle scattering experiment is
A.    Mass and energy are related
B.  Electrons occupy the outer space of nucleus
C.  Neutrons are situated inside the nucleus
      D.  The collision of matter can be established
5. Which of the following configurations represent the Gallium (Z=31)
A.    .1s2, 2s2, 2p6, 3s2,3p6, 3d10, 4s2 ,4p1
B.     1s2, 2s22p6, 3s23p6, 4p1 ,3d10, 4s2
C.  1s2, 2s22p6, 3s23p6, 4s2 ,3d10, 4p1
D.    1s2, 2s22p6, 3s23p6,  4s24p1 ,3 d10

 6. Which of the following combination of quantum numbers is NOT possible?
A.    {3        2          -0         ½}      
B.     {4        0          0          ½}
C. {3     2      -3     ½}
D.    {5        3          0          -1/2}

7.  Molarity  of  pure water  is
A.  1.00    
B.  6.000
C.  18.00              
D.  55.55

8. The conjugate base of HSO4-1  is     (HSO4-1     →      H+  + SO4-2)
A. SO2-4      
B. SO2-3
C. H2SO4                  
D. H2SO3

9. Which of the following can be considered as an acid according to Lowry –Bornsted
theory?
A.OH-                         
B. H3O+
C. Cl-           
D. HSO-4

10.From the molecular point of view molecules evaporate form the surface of a liquid if them:
A.  have sufficient K.E to overcome the attractive coerces in the liquid
B.     are attracted to other molecules in the vapor phase
C.     are in the state of dynamic equilibrium
D.    are repelled by other molecules in the liquid phase

11.The highest  temperature at which a liquid can coexist  in equilibrium with its
vapour is called:
A.  Melting point             
B.  Critical point
C.  Critical temperature  
D.  all of these

12. The smallest portion or the space of lattice which Show  the pattern of lattice is called
A.    Unit cell 
B.      Crystal lattice
C.  Space lattice   
D.  Cubic crystals
13. A solid in which the constituent structural units are arranged in definite
geometrical configuration, characteristic of the substance is known as
A.    Amorphous solid        
B. Crystalline solid
C.   Pseudo solid              
D.  Super cooled liquid
14.   
Experiment No.

Initial concentrations
Initial Rate of reaction
Mol/dm3/hr
[A]
      [B]
01
0.10
0.02
10
02
0.10
0.03
15
03
0.2
0.02
20
 The rate law derived for the reaction from the above data is 

A. Rate law  =k [A][B]
B. Rate law  =k [A]2[B]
C. Rate law  =k [A] 2 [B]1/2
D. Rate law  =k [A]1/2[B]2
15. A positive catalyst  can:
                
A. diminish the enthalpy of reaction
B. shift the equilibrium of reaction
C. makes a reaction thermodynamically more feasible
D. diminish the activation of reaction 
16.              If a system at equilibrium is disturb by some change, the system will shift so as to undo the effect of the changes this statement is known as
A.    Le- Chatelier’s principle      
B.     Law of mass action
C.  Graham’s law             
D.   Equilibrium Law

17.               At a temperature of about 4250C ,  H2 (g) + I2(g)  ↔ 2HI(g)
the equilibrium mixture contain  [H2] =0.10  ,[I2]= 0.10 and [HI]= 0.70. If suddenly 0.050 mol/dm3 of H2, 0.050 mol/dm3 of I2 0.350 mol/dm3 of HI were added , the result would be that:
                            
A. more HI would from
            B.  the equilibrium would be shifted to the right
            C.  More H2  and I2 would from 
D. No net Chemical change would occur
     
18. The hybridization of Chlorine   atom in HClO4 molecule is
            A.  Sp                         
            B.  Sp2
            C.  Sp3                                        
                D.  Sp3d2

19. The geometrical  shape of SO2 molecule is
            A . Tetrahedral                                   
            B . Triangular planer
            C .  Bent                        
            D . Linear
           
20.  Which molecule does have net dipole moment is Zero
            A .   CO2                 
                B .   NH3
            C.    H2O                    
            D .   HCl        
21 . A real gas most closely approaches the behavior of an ideal gas under condition of :   
      A.  High pressure and low temp.
      B. Low pressure and high temp.
      C. Low pressure and low temp. 
      D. High pressure and high temp.

22. At sea level  boiling point of liquid, the vapour pressure of the liquid :                         
      A. is equal to 76cm of Hg
      B. differs for different substance
      C.  does not have a definite value vapour pressure at boiling
      D. is equal to 76 torr

23. The portion of matter under investigation is known as
            A .  System                                  
            B.  Surrounding 
            C .  States  function   
            D.  Intensive properties 

24. Hess’ law deal  with
            A .  heat change accompanying a chemical process
            B .  rate of chemical reaction
            C .  Equilibrium
            D.   Influence of temperature on reaction

           
25.  In a process a  1200 J heat   absorbed in a system a  while 200 J work done on the
system  the change in internal energy is
A.   1400 J 
B.     1000 J
C.   600 J        
D.   1600 J
26.       During rusting of iron, it gets
A.  Oxidized
B.     Reduced
      C.  Sublimed        
D.  Decomposed
                   
27.       The following reaction is a Redox reaction 
            S2O32-     +      I2      +  OH-                                              SO42-  +  I-    + H2O
Which substance is act as oxidizing agent?
A.    S2O32   
B.   I2   
C.     OH-      
D.    O42- 

28.  The diagram shown the structure of        
 








A.    Hydrogen electrode   
B.  Voltaic cell
C.  Down’s cell    
D.  Nelson’s   cell
29. One molal solution of substance contain one mole of solute in:  
A. 1000 cm3 of solution   
B. 1000 cm3 of solvent
C. 1000 g of solvent         
D. 22.4 dm3  
30.The compositions of different solutions of sugar in water are below
 i) 10g of sugar dissolved in 100g of water = “P” solution
ii) 20g of sugar dissolved in 100g of water = “Q” solution
iii) 30g of sugar dissolved in 100g of water = “R” solution
            iv) 40g of sugar dissolved in 100g of water  =  “S”  solution
            which solution has highest boiling point  
             A.   “S” solution
             B.   “Q” solution     
             C.   “R” solution
             D.   “P” solution



Friday, 11 January 2013

18.5 Improtant web site


18. 4 Notes


18.3 Assignment


18.2 ERQs


18.1 CRQs


17.5 Improtant web site


17.4 Notes



ALCOHOL
Alcohols are hydroxy-substituted alkanes, alkenes, or alkynes in which the substitution occurs on a saturated carbon.
The general formula for alcohols is R—OH, where the R group can represent the alkyl, alkenyl, or alkynal groups. In the case of substitution on alkenes and alkynes, only saturated carbons may be substituted. For example, the following compounds are all alcohols:




If the hydroxyl group were substituted for a hydrogen on an unsaturated carbon, an alcohol would not form. For example, substituting the hydroxyl group for a terminal hydrogen of 1-propene gives an unstable enol that tautomerizes to a ketone.




You can use both the common and IUPAC systems to name alcohols. In the common system, you name an alcohol by listing the alkyl group and adding the word alcohol. Following are some examples of alcohols and their common names:






In the IUPAC system, use the following series of rules to name alcohols:
  1. Pick out the longest continuous chain to which the hydroxyl group is directly attached. The parent name of the alcohol comes from the alkane name for the same chain length. Drop the -e ending and add -ol.
  2. Number the parent chain so that the carbon bearing the hydroxyl group has the lowest possible number. Place the number in front of the parent name.
  3. Locate and name substituents other than the hydroxyl group.
The following examples show how you apply these rules:






You may classify alcohols as primary (1°), secondary (2°), or tertiary (3°), based on the class of carbon to which the hydroxyl group (—OH) is directly bonded. For example, 1-propanol is a 1° alcohol, 2-propanol is a 2° alcohol, and 2-methyl-2-propanol is a 3° alcohol.

Alcohols contain both a polar —OH group and a nonpolar alkyl group. As a result of this composition, alcohols that have small alkyl chains tend to be water soluble. As alkyl chain length increases, water solubility decreases.
Through the OH group, alcohols are capable of forming hydrogen bonds to themselves, other alcohols, neutral molecules, and anions. This bond formation leads to abnormally high boiling points compared to other organic molecules of similar carbon chain length.

Reference:

Oxidative Cleavage of Diols
Reaction type: Oxidation-reduction
Summary
 
  • 1,2- or vicinal diols are cleaved by periodic acid, HIO4, into two carbonyl compounds.
  • The reaction is selective for 1,2-diols.
  • The reaction occurs via the formation of a cyclic periodate ester (see right).
  • This can be used as a functional group test for 1,2-diols.
  • The products are determined by the substituents on the diol.
Questions:
Can you recall a reaction that forms carbonyl groups via cleavage of an alkene ? 

How are 1,2-diols made from alkenes ? 

What are the oxidation states of the iodine in HIO4 and HIO3 ? 

 
PERIODATE CLEAVAGE OF 1,2-DIOLS

The mechanism is not trivial, so attention here is focused on the actual cleavage step. Prior to this, the alcohol reacts to form a cyclic periodate ester (shown). The periodate ester undergoes are arrangement of the electrons, cleaving the C-C bond, and forming two C=O.
Reference:


Esters are compounds that are commonly formed by the reaction of oxygen-containing acids with alcohols. The ester functional group is the
Alcohols can be converted to esters by means of the Fischer Esterification Process. In this method, an alcohol is reacted with a carboxylic acid in the presence of an inorganic acid catalyst.
Because the reaction is an equilibrium reaction, in order to receive a good yield, one of the products must be removed as it forms. Doing this drives the equilibrium to the product side.






In this process, benzene sulfonic acid is reacted with aqueous sodium hydroxide. The resulting salt is mixed with solid sodium hydroxide and fused at a high temperature. The product of this reaction is sodium phenoxide, which is acidified with aqueous acid to yield phenol.
In the Dow process, chlorobenzene is reacted with dilute sodium hydroxide at 300°C and 3000 psi pressure. The following figure illustrates the Dow process.
The air oxidation of cumene (isopropyl benzene) leads to the production of both phenol and acetone, as shown in the following figure. The mechanisms for the formation and degradation of cumene hydroperoxide require closer looks, which are provided following the figure.






Cumene hydroperoxide formation. The formation of the hydroperoxide proceeds by a free radical chain reaction. A radical initiator abstracts a hydrogen-free radical from the molecule, creating a tertiary free radical. The creation of the tertiary free radical is the initial step in the reaction.






In the next step, the free radical is attracted to an oxygen molecule. This attraction produces the hydroperoxide free radical.






Finally, the hydroperoxide free radical abstracts a hydrogen free radical from a second molecule of cumene to form cumene hydroperoxide and a new tertiary free radical.






Cumene hydroperoxide degradation. The degradation of the cumene hydroperoxide proceeds via a carbocation mechanism. In the first step, a pair of electrons on the oxygen of the hydroperoxide's “hydroxyl group” is attracted to a proton of the H3O+ molecule, forming an oxonium ion.






Next, the oxonium ion becomes stabilized when the positively charged oxygen leaves in a water molecule. This loss of a water molecule produces a new oxonium ion.






A phenide ion shift to the oxygen atom (which creates a tertiary carbocation) stabilizes the positively charged oxygen. (A phenide ion is a phenyl group with an electron bonding pair available to form a new bond to the ring.)




http://media.wiley.com/Lux/02/22902.nce015.jpg


The carbocation is stabilized by an acid-base reaction with a water molecule, leading to the formation of an oxonium ion.




http://media.wiley.com/Lux/03/22903.nce016.jpg


The loss of a proton stabilizes the oxonium ion.






Next, a proton is picked up by the ether oxygen in an acid-base reaction, yielding a new oxonium ion.






The positively charged ether oxygen pulls the electrons in the oxygen-carbon bond toward itself, thus delocalizing the charge over both of the atoms. The partial positive charge on the carbon attracts the nonbonding electron pair from the oxygen of the OH group, allowing the electrons in the original oxygen-carbon bond to be released back to the more electronegative oxygen atom.




http://media.wiley.com/Lux/06/22906.nce019.jpg


Finally, a proton is lost from the protonated acetone molecule, leading to the formation of acetone.





Ethers
Ethers are alkoxy (RO—)-substituted alkanes, alkenes, and alkynes. As with alcohols, only saturated carbon atoms may be substituted in alkenes and alkynes.


http://media.wiley.com/Lux/75/22975.nce041.jpg


Ethers are commonly named by listing the names of the groups attached to the oxygen atom and adding the word ether. Examples include:






IUPAC nomenclature names ethers as alkoxy alkanes, alkoxy alkenes, or alkoxy alkynes. The group in the chain that has the greatest number of carbon atoms is designated the parent compound. In the case of aromatic ethers, the benzene ring is the parent compound.




http://media.wiley.com/Lux/77/22977.nce043.jpg


Cyclic ethers, oxygen-containing ring systems, are normally called by their common names.




http://media.wiley.com/Lux/78/22978.nce044.jpg



Physical properties
The bonds between the oxygen atom and the carbon atoms of the alkyl groups in an ether molecule are polarized due to a difference in electronegativities between carbon and oxygen. In addition, the bond angle between the alkyl groups on the oxygen is 110°. These facts show that ether molecules must be dipoles (molecules having both a center of positive and negative charge) with weak polarities. Thus, the structure of ether is similar to that of water.


http://media.wiley.com/Lux/79/22979.nce045.jpg


However, in water the hydrogen atoms have a greater partial positive charge than the hydrogen atoms on ether. In water, the charge is localized (only on) the hydrogens and not delocalized (spread throughout) as with the alkyl groups, so the charge is stronger in water than in ethers.
Like water, ether is capable of forming hydrogen bonds. However, because of the delocalized nature of the positive charge on the ether molecule's hydrogen atoms, the hydrogens cannot partake in hydrogen bonding. Thus, ethers only form hydrogen bonds to other molecules that have hydrogen atoms with strong partial positive charges. Therefore, ether molecules cannot form hydrogen bonds with other ether molecules. This leads to the high volatility of ethers. Ethers are capable, however, of forming hydrogen bonds to water, which accounts for the good solubility of low molecular weight ethers in water.
Table 1 shows boiling points for some simple ethers and the boiling points of alcohols of the same number of carbon atoms. Notice that due to the hydrogen bonding between alcohol molecules, all alcohols have appreciably higher boiling points than their isomeric ethers.
TABLE 1
Boiling Points of Simple Ethers and Alcohols

Ether
Boiling Point(°C)
Alcohol
Boiling Point (°C)
CH3OCH3 Dimethylether
−25
CH3CH2OH Ethanol
79
CH3OCH2CH3 Methylethyether
11
CH3CH2CH2OH Propanol
82
CH3CH2OCH2CH3 Diethylether
35
CH3CH2CH2CH2OH Butanol
117